The failure to maintain and operate oilfield materials properly could result in an economic disaster. Oil country tubular goods should be cleaned and coated by a professional. The proper care of goods will reduce downtime, plus will eliminate oil spills. 

Quality Metal Materials

Oil country tubular goods are all of the materials used to extract oil from underground. Oil pipes, casing materials, and fittings work interchangeably to extract oil. The quality of a metal product could have a bearing on how long tubular goods last. Many manufacturers of oilfield materials sell steel products or alloys that are resistant to corrosion.

Products are designed to withstand hostile environments. Coatings are applied to tubular products before they are used to extract oil. Coatings will need to be reapplied to the metal at scheduled times.

Familiarize yourself with the coating requirements for the metal components that are used in your line of work. Hire a technician who will be responsible for professionally cleaning and coating the metal as needed.

Oilfield Training Essentials

Anyone who will be working on your oil mining team should be trained to manually handle and maintain oil country tubular goods. If too much pressure is applied to threaded parts that comprise a series of pipes, the threaded areas may fail. This could result in the need to perform field repairs.

Training should be implemented at regular intervals. Training will promote confidence, plus will minimize errors that could damage tubular products.

Metal Cleaning And Coating Processes

All of the cleaning and coating processes should be left up to the technician who you hire. If you were to attempt to clean or coat the metal yourself, you may not perform the task properly. Improperly coated products are prone to premature damage.

A technician will assess the metal first. Then, they will determine which type of cleaning and coating processes to use. Coatings are applied to tubular products that are located on land or in the water. The coatings preserve the chemical makeup of the metal. They also prevent exposed metal from becoming dirty.

Any oilfield equipment that needs to be cleaned and coated should not be used for extraction purposes. The technician who performs the cleaning and coating processes will ensure that all of the tubular goods are in operable order.

Once a service appointment concludes, the technician will give you the approval to use the mining materials as you normally would use them.

Contact a supplier to learn more about oil country tubular goods coating

Share